| |
|
|
|
|
|
|
|
|
Folding Ramps
Nautic-Lift
folding boarding ramps are designed for everyone
to have safer, easier access on and off your boat.
Ramps, 6 feet or less in length, can be raised and
lowered from both the dock and the boat. Ramps,
5 feet or less in length, can be made self-supporting.
They do not need to rest on the boat and can hold
up to 350 pounds. Non self-supporting ramps can
be made up to 12 feet in length.
|
Folding
Ramps
Size |
Single
handrail self-supporting |
|
Single
handrail non-self-supporting |
|
2'
x 3'
2' x 4'
2' x 5'
2' x 6'
2' x 8
2' x 10'
2' x 12'
|
FD-321-S
FD-421-S
FD-521-S |
FD-321-N
FD-421-N
FD-521-N
FD-621-N
FT-821-N
FT-1021-N
FT-1221-N |
| Self-supporting
models can be raised or lowered to a 90 degree position.
Non self-supporting ramps can be lowered further,
to a 45 degree angle below the horizontal position.
However, they must rest on the boat to support a load.
|
|
|
Winch-operated
ramps can only be raised and lowered from the
dock side. Ramps with the rope and pulley system can
be raised and lowered from both the dock and the boat
side. Any ramp can be ordered with either the winch
or pulley system.
|
|
| Service
platforms are designed to be installed dockside
behind the boat. When the platform is lowered to the
horizontal position, the engines, trim tabs and drain
plug are easily accessible. When the platform is raised,
it is flush with the dock, and thereby, does not interfere
with the operation of a boatlift or dockage of the boat. |
|
| |
|
|
Piling
Mounted - Winch Operated Service Platforms |
| |
|
|
 |
|
|
|
Lift &
Davit Company, Inc.
Tel: 772.225.2325
Toll
Free: 1.866.854.5438
EMAIL
© Lift
& Davit Company, Inc. 2003
|
|
|
| |
